Video Lecture

Theory For Making Notes

Concept Of Potential

\displaystyle dW={{\vec{F}}_{{ext}}}.\overrightarrow{{ds}}

Let us take a test charge q from a point A to another point B with constant speed in an electrostatic field E .When the charge is taken in an electric field two forces are acting on it one is of electrostatic field (F=qE)  and other of external agent (Fext) and both do work on the charge. Now to keep the speed constant, it is necessary that the change in kinetic energy of the charge should be zero. From the equation of Work energy theorem we know that

\displaystyle {{W}_{{total}}}=\Delta KE

 

\displaystyle \Rightarrow {{W}_{{ext}}}+{{W}_{{elect.field}}}=0\text{   (}\Delta KE\text{ is zero)}

 

\displaystyle \Rightarrow {{W}_{{ext}}}=-{{W}_{{elect.field}}}

 

Hence it should be noted that the force of external agent should be opposite to that of electrostatic field i.e. Fext = – (qE).

In other words the external agent is doing work against the electrostatic force which is conservative in nature. And we know that work done against a conservative force changes the potential energy of the system (here the potential energy of the test charge).

Therefore we can write  \displaystyle {{W}_{{ext}}}=\Delta PE ——(i)

Important Point To Understand is that when our test charge is a unit positive charge we replace the Potential energy (PE) with a simple word Potential and denote it with V. Hence Potential is nothing but the potential energy of a unit positive charge or we can say that the potential is the potential energy per unit charge.

Hence \displaystyle V=\frac{{PE}}{q}

Or  \displaystyle PE=Vq ——(ii)

Some author use symbol U for potential energy then we can write the above equation as \displaystyle U=Vq

Also understand that potential is produced by the field and it has nothing to do with the charge to be carried. It is the potential energy which depends on the magnitude of the charge as given in equation (ii)

This concept is similar to that of electric field intensity and electrostatic force. Recall that electric field intensity is nothing but the electrostatic force acting on a unit positive charge or simply it is the force per unit charge so we write \displaystyle \vec{E}=\frac{{\vec{F}}}{q}.

The potential at a point is represented by symbol V. Its S.I. unit is volt. ( 1 volt = 1 J/C ).The dimensions of V are

\displaystyle \text{ }\!\![\!\!\text{ }V] = \left[ {\frac{{PE}}{q}} \right] =\text{ }\left[ {\frac{{\text{M}{{\text{L}}^{\text{2}}}{{\text{T}}^{{-2}}}}}{{\text{AT}}}} \right]\text{ }=\text{ }\left[ {\text{M}{{\text{L}}^{\text{2}}}{{\text{T}}^{{-3}}}{{\text{A}}^{{-1}}}} \right]

 Now let the external work is Wext . This work is related with potential energy because it is done against the conservative  electrostatic field

If VA and VB are the electric potentials of two points A and B, and if we are moving from point A to B, then potential difference is

ΔV = VBVA

Once the potential difference between two points is known, the external work needed to move a charge q (with no change in its speed) from point A to B may be found

From equation (i)   \displaystyle {{W}_{{ext}}}=\Delta PE                                    

\displaystyle \Rightarrow {{W}_{{ext}}}=P{{E}_{B}}-P{{E}_{A}}

 

\displaystyle \Rightarrow {{W}_{{ext}}}={{V}_{B}}q-{{V}_{A}}q

 

\displaystyle \Rightarrow {{W}_{{ext}}}=({{V}_{B}}-{{V}_{A}})q ————(3)

From the above equation we can derive the definition of potential at any point.

If Initial point A is taken at infinity and the potential at infinity is taken as zero (conventionally) and the test charge q is taken as a unit positive charge, then we can put VA=0 and q=1 in the above equation number (3)

we get \displaystyle \Rightarrow {{W}_{{ext}}}=({{V}_{B}}-0)\times 1

hence \displaystyle {{W}_{{ext}}}={{V}_{B}}  . Therefore the potential at a point (in an electric field) is the external work needed to bring a positive unit charge, at constant speed, from the position of zero potential to the given point. Conventionally, the point of zero potential is taken at infinity.

Importance Of Sign Of Work

As we know that \displaystyle {{W}_{{ext}}}=({{V}_{B}}-{{V}_{A}})=\Delta V.q

From the above relation it is clear that the sign of this work depends on the sign of q and the relative magnitudes of VA and VB.

(i)

If Wext> 0, that is work is positive :

Work is done by the external agent on the charge as shown in fig.(A) where the charge is displaced opposite to the electric field. In this case the potential energy of the charge increases

(ii)

If Wext< 0, that is work is negative:

Work is done by the field. In this case, the external force acts opposite to the displacement of the charge and the charge is displaced along the electric field. In this case the potential energy of the charge decreases.

The quantity ΔV depends only on the field set up by the source charges, not on the test charge.

Potential of a Point Charge

 

∞∞Consider a test charge qo=1C to be taken from infinity (A) to a point B in the electric field of a source charge Q. At any point in between A and B the electric field due to the source point charge Q is given as

\displaystyle \vec{E}=\frac{{kQ}}{{{{r}^{2}}}}\hat{r}

 

Let the test charge is given a displacement ds for which the work done by the external force is

\displaystyle dW={{\vec{F}}_{{ext}}}.\overrightarrow{{ds}}

 

  \displaystyle \Rightarrow dW=-{{q}_{o}}E\times (-dr)\cos ({{180}^{o}}) hereqo = 1

 

\displaystyle \Rightarrow dW=-E\times dr  [becausedW=dV ( potential difference)]

 

\displaystyle \Rightarrow dV=-E\times dr ———-(4)

 

The change in potential from point A to point B is

\int\limits_{{{{V}_{A}}}}^{{{{V}_{B}}}}{{dV}}=-\int_{A}^{B}{{E\text{ }dr}}=-\int_{A}^{B}{{\frac{{kQ}}{{{{r}^{2}}}}d}}r

 

\Rightarrow {{V}_{B}}-{{V}_{A}}=-kQ\int_{A}^{B}{{\frac{{dr}}{{{{r}^{2}}}}}} 

 

\Rightarrow {{V}_{B}}-{{V}_{A}}=-kQ\left[ {-\frac{1}{r}} \right]_{\text{A}}^{\text{B}}=\text{ }kQ\text{ }\left( {\frac{1}{{{{r}_{\text{B}}}}}-\frac{1}{{{{r}_{\text{A}}}}}} \right)

 

If we choose V = 0 at r = ∞ that is at A, the point A shift to the infinity. The potential at any point B radially at a distance r from the source charge in the field is given as

V=\frac{{kQ}}{r}

 

 

Potential of a System of Charges

The principle of superposition is also applicable for potentials. The total potential at a point is given by the algebraic sum of the potentials due to the individual charges,

V = V1 + V2 + V3 + …

Figure shows the potential of two equal and opposite point charges separated by a distance. The dotted curves are the individual potential functions, whereas the solid curve is the total potential function. Notice that at the mid-point, V = 0 but E ≠ 0.

Figure: Potential variation of two equal but opposite charges separated by some distance

Figure shows the total potential due to two equal positive point charges separated by a distance. Notice that at the mid-point E = 0 by V ≠ 0.

Potential Due to a Continuous Charge Distribution

The potential due to a continuous charge distribution may be obtained in two ways.

First method

Find the potential at the given point (see figure) due to an infinitesimally small point charge dq.

That is            dV = \frac{{kdq}}{r}

Integrate this expression over the whole charge distribution

V = k \int{{\frac{{dq}}{r}}}

 

Second method

If E is already known by, Gauss law, then potential may be obtained from equation

VB– VA -\int\limits_{A}^{B}{{E.ds}}

Line Integral of electric field

Consider a source charge placed at the origin. Let a test charge qo is to be taken from A to B along any curved path shown by the dotted black curve in the diagram. At any point between A and B the charge qo is present where the electric field due to source charge is E. The force on the test charge is qoE at this point.Let the test charge is given a small displacement dl here. Now dl can be resolved into two components one along the force or electric field i.e. dlcosq and other perpendicular to field i.e. dlsinq. Since dlsinq is perpendicular to the force or field so no work is done for this component of displacement. Hence all work is to be done for  dl cosq component. This component is called the radial component and denoted by dr.

We know that electrostatic force is \vec{F}={{q}_{o}}\vec{E}.
 
The work done by this force is dW=\vec{F}.\overrightarrow{{dl}}={{q}_{o}}\vec{E}.\overrightarrow{{dl}}
 

Hence \frac{{dW}}{{{{q}_{o}}}}=\vec{E}.\overrightarrow{{dl}}

total work done from A to B can be found by integration

\displaystyle \frac{1}{{{{q}_{o}}}}\int\limits_{A}^{B}{{dW}}=\int\limits_{A}^{B}{{\vec{E}.\overrightarrow{{dl}}}}

 

\displaystyle \Rightarrow \frac{W}{{{{q}_{o}}}}=\int\limits_{A}^{B}{{\vec{E}.\overrightarrow{{dl}}}}

 

In the above equation the integration of electric field i.e. \displaystyle \int\limits_{A}^{B}{{\vec{E}.\overrightarrow{{dl}}}}  gives the Line Integral Of Electric Field.

It is defined as the work done by the electric field in displacing a unit positive charge from one point to other in an electric field.

In this case when the source charge is a point charge we can calculate the line integral as follows    \displaystyle \int\limits_{A}^{B}{{\vec{E}.\overrightarrow{{dl}}}}=\int\limits_{A}^{B}{{E.dl\cos \theta }} 

\displaystyle =\int\limits_{{{{r}_{A}}}}^{{{{r}_{B}}}}{{E.dr}} ( \displaystyle \because dlcosq =dr)

\displaystyle \Rightarrow \int\limits_{{{{r}_{A}}}}^{{{{r}_{B}}}}{{E.dr}}=kq\int\limits_{{{{r}_{A}}}}^{{{{r}_{B}}}}{{\frac{{dr}}{{{{r}^{2}}}}}}=kq\left[ {-\frac{1}{r}} \right]_{{{{r}_{A}}}}^{{{{r}_{B}}}}     

 

\displaystyle \Rightarrow \int\limits_{{{{r}_{A}}}}^{{{{r}_{B}}}}{{E.dr}}=-kq\left[ {\frac{1}{{{{r}_{B}}}}-\frac{1}{{{{r}_{A}}}}} \right]=kq\left[ {\frac{1}{{{{r}_{A}}}}-\frac{1}{{{{r}_{B}}}}} \right]

 

The final value of line integral which was actually work done on a unit positive charge depends only on initial and final position vectors i.e. rA and rB only and not on the path taken between A and B, so we can 

 

Relationship between E and V

We know that             

ΔV = \frac{{{{W}_{{ext}}}}}{q}

Also     Wext= \int{{{{{\vec{F}}}_{{ext}}}.d\overrightarrow{l}}}

Since the external force is equal and opposite to the electrostatic force

Therefore,       {{\vec{F}}_{{ext}}}=-q\vec{E}

or         Wext= – \int{{q\,\vec{E} .\,\overrightarrow{{d\,l}}}}

The figureshows a curved path in a non-uniform field. The potential difference between the points A and B is given by

VB VA= -\int\limits_{A}^{B}{{\vec{E}.\overrightarrow{{dl}}}}            (5)

Since the electrostatic field is conservative the value of this line integral depends only on the end points A and B, not on the path taken.

The equation (5) can be used to find the potential function if electric field function is given. Let us see, how to obtain an expression for electric field if potential function is known?

An infinitesimal change in potential associated with the displacement d \vec{s} is given by

dV = – \vec{E}.d \vec{l} = –Edlcosq

Since Es= E cosq is the component of \vec{E} along d \vec{l} , the above equation may  be written as
dV = –Esdl, from which we infer that

Es= – \frac{{dV}}{{dl}}                          (6)

Since the direction of d \vec{l} is arbitrary, equation (6) may be interpreted as follows:

Any component of \vec{E} may be found from the rate of V with distance in the chosen direction. There will be one direction for which this rate of change is a maximum. The magnitude of \vec{E} is given by this maximum value of the spatial derivative: that is E = -(dV/dl)max. As figure given belowshows, the maximum occurs in the direction in which the equipotentials are most closely spaced.

In rectangular components the electric field is

\vec{E}= Ex \hat{i} + Ey \hat{j} + Ez \hat{k}and an infinitesimal displacement is

d \vec{l}= dx \hat{i} + dy \hat{j} + dz \hat{k} . Thus,

dV= – \vec{E}. d \vec{l}

dV   = -(Exdx + Eydy + Ezdz)     (14)

For a displacement in the x direction,

dy = dz= 0

and so dV= –Exdx.

Therefore,

Ex= -{{\left( {\frac{{dV}}{{dx}}} \right)}_{{y,z\,\text{cons}\tan t}}}

A derivative in which all variables except one are held constant is called partial derivative and is written with a ∂ instead of d. The electric field is therefore

\vec{E} -\frac{{\partial V}}{{\partial x}}\,\hat{i}\,-\frac{{\partial V}}{{\partial y}}\hat{j}\,-\frac{{\partial V}}{{\partial z}}\hat{k}                                    (7)

The right side of equation (7) is called the gradient of V.

Illustration

A hypothetical potential function has the following form

V(x,y,z)= 2x3y– 3xy2z + 5yz3

Obtain an expression for electric field

Solution

Using equation (15),

\vec{E} -\left( {\frac{{\partial V}}{{\partial x}}\,\hat{i}\,+\frac{{\partial V}}{{\partial y}}\hat{j}\,+\frac{{\partial V}}{{\partial z}}\hat{k}} \right)

Here    \frac{{\partial V}}{{\partial x}} = 6x2y– 3y2z;

\frac{{\partial V}}{{\partial y}} = 2x3– 6xyz + 5z2

\frac{{\partial V}}{{\partial z}} = -3xy2+ 15yz2

Thus, \vec{E} = (-6x2y + 3y2z) \hat{i}  + (-2x3+ 6xyz – 5z3) \hat{j}  + (3xy2– 15yz2) \hat{k}

Illustration

If in figure, q = 40 µC, x = 0.5m, y = 0.8m, z = 0.6m, what is the potential at point P?

Solution

Here r = (0.52 + 0.82 + 0.62)1/2 = 1.118m. Hence,

\displaystyle {{V}_{P}}=k\frac{q}{r}=(9\times {{10}^{9}})\frac{{40\times {{{10}}^{{-6}}}}}{{1.118}}=3.22\times {{10}^{5}}\text{V}\,\,\text{=}\,\,\text{322kV}

Illustration

An infinite number of charges each equal to q=1\mu C are placed along the x- axis at  x=1  cm, x=2 cm, x=4 cm, x=8 cm,…… and so on. Find the potential at the origin due to this set of point charges.

Solution

Potential at the origin,  V=k\sum{{\frac{{{{q}_{i}}}}{{{{r}_{i}}}}}}

or   V=\frac{{kq}}{{1\times {{{10}}^{{-2}}}}}+\frac{{kq}}{{2\times {{{10}}^{{-2}}}}}+\frac{{kq}}{{4\times {{{10}}^{{-2}}}}}+……..= \frac{{\left( {9\times {{{10}}^{9}}} \right)\,{{{10}}^{{-6}}}}}{{{{{10}}^{{-2}}}}}\left[ {1+\frac{1}{2}+\frac{1}{4}+\frac{1}{8}+…….} \right]

Thus series is an infinite geometric progression having first term 1 and common ratio 1/2, the sum is given by

s=\frac{a}{{1-r}}

s=\frac{1}{{1-\frac{1}{2}}}=2                  

Hence       V=18\times {{10}^{5}}volt

Illustration

Two identical positive point charges q are placed on the
x-axis at x=-a and x=+a , as shown in figure.

(i)  Plot the variation of V along the x-axis.

(ii)       Plot the variation of V along the y-axis.

V=\frac{{kq}}{{\sqrt{{{{a}^{2}}+{{y}^{2}}}}}}

 

\frac{{dV}}{{dy}}=\frac{{-kqy}}{{{{{\left( {{{a}^{2}}+{{y}^{2}}} \right)}}^{{3/2}}}}}

 

{{V}_{{\max }}} occurs at y=0

And its value is {{V}_{{\max }}}=\frac{{kq}}{a}

Illustration

What is the electric potential on the axis of a uniformly charged ring of radius R containing charge q, at a point x away from the center of the loop?

Solution

Let us consider a charge element ‘dq’ on the ring. Now electric potential due to this charge element at P is given by

\displaystyle dV\,\,=\,\,\frac{{dq}}{{4\pi {{\varepsilon }_{0}}\,\,\sqrt{{{{R}^{2}}+{{x}^{2}}}}}}


As electric potential is a scalar quantity. Hence electric potential at P.


\displaystyle V\,\,=\,\,\int{{\frac{1}{{4\pi {{\varepsilon }_{0}}}}}}\,\,\,\,\frac{{dq}}{{\sqrt{{{{R}^{2}}+{{x}^{2}}}}}}\,\,\,=\,\,\,\,\frac{1}{{4\pi {{\varepsilon }_{0}}\sqrt{{{{R}^{2}}+{{x}^{2}}}}}}\,\,\,\int{{dq}}


or      \displaystyle V\,\,=\,\,\frac{q}{{4\pi {{\varepsilon }_{0}}\,\,\sqrt{{{{R}^{2}}+{{x}^{2}}}}}}

Illustration

Two identical thin rings each of radius R are placed coaxially a distance R apart. If {{Q}_{1}} and {{Q}_{2}} are respectively the charges uniformly distributed on the two rings. Find the work done in moving a charge q from the center of one ring to that of the other?

Solution

Let the particle has been moved from center A of ring (charge {{Q}_{1}}) to center B of the ring (charge {{Q}_{2}}) by external agent. Hence work done,

W=q\left( {{{V}_{B}}-{{V}_{A}}} \right)


Here   {{V}_{B}}=\frac{{k{{Q}_{1}}}}{{\sqrt{2}R}}+\frac{{k{{Q}_{2}}}}{R}


and  {{V}_{A}}=\frac{{k{{Q}_{2}}}}{{\sqrt{2}R}}+\frac{{k{{Q}_{1}}}}{R}


W=kq\,\left[ {\frac{{{{\text{Q}}_{\text{1}}}}}{{\sqrt{\text{2}}R}}+\frac{{{{\text{Q}}_{\text{2}}}}}{R}-\frac{{{{\text{Q}}_{\text{2}}}}}{{\sqrt{\text{2}}R}}-\frac{{{{\text{Q}}_{\text{1}}}}}{R}} \right]


=\frac{{kq}}{R}({{Q}_{1}}-{{Q}_{2}})\left[ {\frac{1}{{\sqrt{2}}}-1} \right]


=\frac{{kq}}{R}({{Q}_{2}}-{{Q}_{1}})\left[ {\frac{{\sqrt{2}-1}}{{\sqrt{2}}}} \right]


Illustration

A non-conducting disc of radius a has a uniform surface charge density s C/m2. What is the potential at a point on the axis of the disc at a distance y from its centre ?

Solution

The symmetry of the disc suggests that the appropriate choice of element is a ring of radius x and thickness dx, as shown in figure. All points on this ring are at the same distance,
r = (x2 + y2)½, from the point P. The charge on the ring is dq = sdA = s(2px dx) and so the potential at point P due to this ring is

\displaystyle dV = \frac{{k dq}}{r} = \frac{{k\text{ }\sigma \text{ }2\pi x dx}}{{{{{\left( {{{x}^{2}}+{{y}^{2}}} \right)}}^{{1/2}}}}}

 Since the potential is a scalar, there are no components to worry about.

Note that there is only one variable, x, in this expression; the distance y is fixed. The potential due to the whole disc is the integral of the above expression.

\displaystyle V=2\pi \text{ }k\sigma \int\limits_{0}^{a}{{\frac{{x\text{ }dx}}{{{{{({{x}^{2}}+{{y}^{2}})}}^{{1/2}}}}}}}

= \displaystyle 2\pi \text{ }k\text{ }\sigma \left| {{{{\left( {{{x}^{2}}+{{y}^{2}}} \right)}}^{{1/2}}}} \right|_{0}^{a}

= \displaystyle 2\pi \text{ }k\text{ }\sigma \left\lfloor {{{{({{a}^{2}}+{{y}^{2}})}}^{{1/2}}}-y} \right\rfloor

If y>>a, \frac{a}{y}<< 1. Then the expression,

\displaystyle {{\left( {{{a}^{2}}+{{y}^{2}}} \right)}^{{1/2}}}\text{ }=\text{ }y\text{ }{{\left( {1+\frac{{{{a}^{2}}}}{{{{y}^{2}}}}} \right)}^{{1/2}}}

 

≈y \displaystyle \left( {1+\frac{{{{a}^{2}}}}{{2{{y}^{2}}}}+…….} \right)

 (using binomial theorem, and ignoring higher order terms)

The expression for V becomes

V=\frac{{kQ}}{y}

 

whereQ = σπa2 is the total charge on the disc. Thus, at large distances, the potential due to a charged disc is the same as that due to a point charge

Illustration

Find the potential V at the edge of a thin disc of radius R with a charge uniformly distributed charge with the surface charge density σ.

Solution

Consider the area element dS in the form of a part of the ring of radius r and width dr. Centre at O as shown in the figure.

dq=\sigma \,\,ds

or  dq=\sigma \left( {2\theta } \right)\,dr

As    r=R\cos \theta

dr=\left( {-2R\sin \theta } \right)\,d\theta

The potential due to this area element at O

dV= \frac{{kdq}}{r}=\frac{{k\sigma (2\theta r)dr}}{r}

Hence the potential at O V=\int{{dV}}=-\frac{{\sigma R}}{{\pi {{\varepsilon }_{0}}}}\int\limits_{{{\pi }/{2}\;}}^{0}{{\theta \sin \theta \,d\,\theta }}

For integration, we use method of integration by parts and we get

  \displaystyle \int{{\theta \sin \theta \,d\theta }}=\theta \int{{\sin \theta \,d\theta }}-\int{{\left[ {\int{{\sin \theta \,d\theta }}} \right]d\theta }} =-\theta \cos \theta +\sin \theta

V=- \frac{{\sigma R}}{{\pi {{\varepsilon }_{0}}}} \left[ {-\theta \cos \theta +\sin \theta } \right]_{{{\pi }/{2}\;}}^{0}= \frac{{\sigma R}}{{\pi {{\varepsilon }_{0}}}}.

 

POTENTIAL ENERGY OF POINT CHARGES

Consider a point charge q placed at position where the potential is V. The potential energy associated with the interaction of this single charge with the charges that created V is

U = qV                         (6)

If the source of the potential is a point charge Q, the potential at a distance r from Q is
V = kQ/r. Therefore, the potential energy shared by two charges q and Q separated by r is

U = \frac{{kqQ}}{r}   (7)

Implicit in Equation (7)is the choice U = 0 at r= ¥, which allows the following interpretation.

The potential energy of the system of two charges is the external work needed to bring the charges from infinity to the separation r without a change in kinetic energy.

 When both charges have the same sign, their potential energy is positive: Positive work is needed to reduce their separation against their mutual repulsion. When the charges have opposite signs, the external work is negative. In this case, the external force has to prevent the particles from speeding upwhich means that the external force is directed opposite to the displacement. Negative potential energy means that  external work is required to separate the charges.

 When calculating the total potential energy of a system of several charges, it is better to write equation (7) as

Uij= \frac{{k{{q}_{i}}{{q}_{j}}}}{{{{r}_{{ij}}}}}

This form helps us not to double count the contributions of the charges.

 Note that Uij= Uji and that we do not include terms for which \hat{i} = \hat{j}. Since the potentials obey the principle of linear superposition the total potential energy of a system is simply an algebraic sum and does not depend on how the charges are assembled.

Equipotential Surface

The locus of all the points, which have the same electric potential, is called an equipotential surface, or equipotential line.

Note that

(a

Equipotential surfaces or lines can never cross each other (otherwise potential at a pointwill have two values which is absurd).

(b

Equipotential surfaces are always perpendicular to lines of force.

(c) 

If a charge is moved from one point to the other over an equipotential surface, work done will be zero.

If the source of the field is a point charge [Fig. (A)] the equipotential surfaces will constitute a family of concentric spheres with their centre at the point where the charge is located.

It is a normal practice to draw equipotential surfaces in such a way that the P.D. (Potential Difference) between two neighboring surfaces be the same. Then the density of equipotential surfaces usually indicates the magnitude of \displaystyle \vec{E} at different points.

In the figure(A) & (B) the equipotentials are drawn as dashed circles. The solid radial lines represent the field lines. Near the charge, the potential changes rapidly with distance. So the equipotentials are close together. The field lines are always normal to the equipotentials and point toward lower values of potential. The field is strong where the equipotentials are closely spaced.

Fig. (B) shows a two-dimensional pattern of an electrostatic field. The dashes lines correspond to equipotential surfaces; while the solid lines to the lines of \displaystyle \vec{E} . Such a representation immediately shows the direction of vector \displaystyle \vec{E}, the regions where field intensity is higher, as well as the regions with greater steepness of potential change. Obviously, as the field points lower potentials,

V5>V4>V3>V2>V1.

Equipotential surfaces in some cases:

Illustration

The figure shown below represents equipotential surfaces. What can you say about the magnitude and direction of the electric field.

Solution

Since electric field is perpendicular to the equipotential surface and in the direction of decreasing potential, therefore, we can say that electric field will be directed at angle 120º with the +ve x-axis.

Also  \displaystyle E\,\,=\,\,-\frac{{dV}}{{dr}}

\displaystyle E\,\,=\,\,\frac{{20-10}}{d}\,\,\,=\,\,\,\frac{{10}}{{10\,\,\sin \,\,30{}^\text{o}}}

 

= 200 V/m 

Practice Questions (Basic Level)

Q.1

What is the potential at the point midway between charges of + 2µC and + 5µC which are 6m apart?

(a)       Zero      

(b)       21 kV      

(c)       10kV      

(d)       50kV

Ans: (b)

Q.2

It requires 50 µJ of work to carry a 2 µC charge from point R to S. What is the potential  difference between the points? Which point is at the higher potential?

(a) 25V      

(b) 10V      

(c) 20 V      

(d) none

Ans: (a)

Q.3

A point charge 20 mC is shifted from infinity to a point P in an electric field with zero acceleration. If the potential of that point is 1000 volt, then

(i)    Find out work done by external agent against electric field?

(a) 25mJ      

(b) 20 mJ      

(c) 10 mJ      

(d)none

Ans- (b),

(ii)    what is the work done by electric field?

(a)– 20 mJ      

(b) 20 mJ      

(c) 10mJ      

(d)none

Ans – (a),

(iii)    If the kinetic energy of charge particle is found increase by 10 mJ when it is brought from infinity to  point P then what is the total work done by external agent?

(a) – 20 mJ      

(b) 20 mJ      

(c) 30 mJ      

(d) none

Ans – (c),

(iv)    what is the work done by electric field in the part (iii)

(a) – 20 mJ      

(b) 20 mJ      

(c) 30 mJ      

(d)none

Ans- (a)

(v)    If a  point charge 30 mC is released at rest at point P, then find out its kinetic energy at a large distance?

(a) – 20 mJ      

(b)  20 mJ      

(c)  30 mJ      

(d)  none

Ans- (a)

Q.4

A charge +2mC is kept at the origin and another charge of 1mC is to be carried from   (2,2) to (6,2). Then the sign of    Work done           and potential difference

(a)   Both work and potential difference are negative

(b)   Both work and potential difference are positive

(c)   work is positive and potential difference is negative

(d)   work is negative and potential difference is positive

Ans; (a)

Q.5

The electron in a hydrogen atom is most probably at a distance r = 5.29 × 10–11m from the proton, which is the nucleus of the atom. Evaluate the electric potential energy U of the atom.

(a) –27.2eV      

(b) –45.2eV      

(c) –13.6eV      

(d) –3.4eV

Ans : (a)

Q.6

When a 2 µC charge is carried from point A to point B, the amount of work done by the electric field is 50 µJ. What is the potential difference and which point is at a higher potential?

(a)  25 V, B           

(b)  25 V, A       

(c)  20V, B         

(d)  both are at same potential

Ans :   (b)

Q.7

Variation in potential is maximum if one goes

(a) along the line of force                                           

(b)  perpendicular to the line of force

(c)  in any direction                                                        

(d)  none of these

Ans : (a)

Q.8

Two point charges Q and –Q/4 placed along the x-axis are separated by a distance r. Take –Q/4 as origin and it is placed at the right of Q. Then the potential is zero

(a) at x = r/3 only                                                           

(b)  at x = –r/5 only

(c)  both at x = r/3 and at x = –r/5

(d) there exist two points on the axis where the electric field is zero

Ans :   (c)

Q.9

Four identical charges are placed at the points (1, 0, 0), (0, 1, 0), (–1, 0, 0) and (0, –1, 0). Then,

(a) the potential at the origin is zero

(b) the electric field at the origin is not zero

(c)  the potential at all points on the z-axis, other than the origin, is zero

(d) the field at all points on the z-axis, other than the origin, acts along the z-axis

Ans :   (d)

Q.10

The work done in taking a unit positive charge from P to A is WA and from P to B is WB. Then

(a)    WA > WB                

(b)    WA < WB 

(c)    WA = WB                

(d)    WA + WB = 0

Ans : (c)

Q.11

Three equal charges of +6 nC are located at the corners of an equilateral triangle whose sides are 12 cm long (figure). Find the potential at the centre of the base of the triangle.

(a)     4500V

(b)    1050V                   

(c)    2320 V                  

(d)    none

Ans: (c)

12.

Three point charges q, –2q and –2q are placed at the vertices of an equilateral triangle of side a. The work done by some external force to slowly increase their separation to 2a will be

(a) \frac{1}{{4\pi {{\varepsilon }_{0}}}}.\,\,\frac{{2{{q}^{2}}}}{a}

(b) \frac{{{{q}^{2}}}}{{4\pi {{\varepsilon }_{0}}a}}                             

(c) \frac{1}{{4\pi {{\varepsilon }_{0}}}}.\frac{{3{{q}^{2}}}}{{3R}} 

(d) zero

Ans (d)

13.

The electric field intensity at a point at a distance 2 m from a charge q is E. The amount of work done in bringing a charge of 2 coulomb from infinity to this point will be  

(a) 2E joules                                      

(b) 4E joules                                      

(c) \frac{E}{2}joules                                       

(d) \frac{E}{4}joules

Ans (b)

14.

Two identical charges are placed at the two corners of an equilateral triangle. The potential energy of the system is U. The work done in bringing an identical charge from infinity to the third vertex is

(a) U     

(b) 2U  

(c) 3U   

(d) 4U

Ans (b)

15.

A unit positive charge has to be brought from infinity to a midpoint between two charges 20mC and 10mC separated by a distance of 50 m. How much work will be required? 

(a) 10.8 × 104 J                                  

(b) 10.8 × 103 J                                  

(c) 1.08 × 106 J                                   

(d) 0.54 × 105 J

Ans (b)

16.

Three charges 2q, –q, –q are located at the vertices of an equilateral triangle. At the centre of the triangle

(a) The field is zero but potential is non-zero 

(b) The field is non-zero but potential is zero                     

(c) Both field and potential are zero                                       

(d) Both field and potential are non-zero

Ans (b)

Practice Questions (JEE Main Level)

Q.1

n charged drops, each of radius r and charge q, coalesce to form a big drop of radius R and charge Q. If V is the electric potential and E is the electric field at the surface of a drop, then

(a)       \displaystyle {{E}_{{big}}}={{n}^{{2/3}}}{{E}_{{small}}}                           

(b)        \displaystyle {{V}_{{big}}}={{n}^{{1/3}}}{{V}_{{small}}}                         

(c)       \displaystyle {{E}_{{small}}}={{n}^{{2/3}}}{{E}_{{big}}}                   

(d)       \displaystyle {{V}_{{big}}}={{n}^{{2/3}}}{{V}_{{small}}}

Ans :    (d)

Q.2

Charge Q is given a displacement \displaystyle \overrightarrow{r}=a\hat{i}+b\hat{j} in an electric field \displaystyle \overrightarrow{E}={{E}_{1}}\hat{i}+{{E}_{2}}\hat{j}. The work done is

(a)       \displaystyle Q({{E}_{1}}a+{{E}_{2}}b)                                                                          

(b)       \displaystyle Q\sqrt{{{{{({{E}_{1}}a)}}^{2}}+{{{({{E}_{2}}b)}}^{2}}}} 

(c)       \displaystyle Q({{E}_{1}}+{{E}_{2}})\sqrt{{{{a}^{2}}+{{b}^{2}}}}   

(d)       \displaystyle Q\sqrt{{{{{(E_{1}^{2}+E_{2}^{2})}}^{2}}}}\,\sqrt{{{{a}^{2}}+{{b}^{2}}}}

Ans :  (a)

Q.3

An electric field is expressed as \displaystyle \overrightarrow{E}=2\hat{i}+3\hat{j}. Find the potential difference \displaystyle ({{V}_{A}}-{{V}_{B}})between two points A and B whose position vectors are given by \displaystyle {{r}_{A}}=\hat{i}+2\hat{j}and \displaystyle {{r}_{B}}=2\hat{i}+\hat{j}+3\hat{k}.

(a) –1 V         (b)  1 V            (c)   2 V          (d)  3 V

Ans :   (a)

Q.4

The potential function of an electrostatic field is given by \displaystyle V=2{{x}^{2}}. Determine the electric field strength at the point (2m, 0, 3 m).

.(a)       \displaystyle \overrightarrow{E}=4\hat{i}(N{{C}^{{-1}}})              

(b)       \displaystyle \overrightarrow{E}=-4\hat{i}(N{{C}^{{-1}}})             

(c)       \displaystyle \overrightarrow{E}=8\hat{i}(N{{C}^{{-1}}})              

(d)       \displaystyle \overrightarrow{E}=-8\hat{i}(N{{C}^{{-1}}})

Ans : (d)

Q.5

An electron is taken from point A to point B along the path AB in a uniform electric field of intensity . Side AB = 5m, and side BC = 3m. Then, the amount of work done on the electron by us is

(a)   50 eV                      

(b)  40 eV

(c)  –50 eV                   

(d)  –40 eV

Ans :  (b)

Q.6

Three charges each of  1mC  are kept at the corners of a triangle of side \sqrt{3}m. Four charges each of 2mC are kept at the corners of a square of side \sqrt{2}m. Find the work required to take a charge of  3mC from the center of the triangle to the center of  square. (Assuming triangle and square are kept at large distance from each other)

(a) +135×10-3J            (b) +13×10-2J        (c) -135×10-3J        (d) +25×10-4J

Ans : (a)

Q.7

Six equal point charges ‘q0’are placed at six corners of a regular hexagon of side ‘a’. Then the work required to take a point charge ‘q’ from infinity to the centre of hexagon.

(a) \frac{{8Kq{{q}_{o}}}}{a}                

(b) \frac{{6Kq{{q}_{o}}}}{a}               

(c) \frac{{3Kq{{q}_{o}}}}{{2a}}            

(d) \frac{{15Kq{{q}_{o}}}}{a}

Ans :  (b)

Q.8

In the previous question find work required to take a point charge ‘q’ from infinity to a point on the axis which is at a distance ‘a ‘ from the centre

(a) \frac{{8Kq{{q}_{o}}}}{a}                

(b) \frac{{6Kq{{q}_{o}}}}{a}               

(c) \frac{{3Kq{{q}_{o}}}}{{2a}}            

(d) \frac{{15Kq{{q}_{o}}}}{a}

Ans ; (c)

Q.9

A positive charge  Q = 50 m C  is located  in the xy plane at a point having position vector {{r}_{o}}=\left( {2\,\hat{i}\,\,+\,\,3\,\hat{j}} \right)m where and   are unit vectors in the positive directions  of  x and y axis respectively.  Find Work done by external agent in transporting a charge  q = 10 mC from (8 m, 6 m)  to the point (4 m, 3 m).

(a) – 2.0 mJ          (b)  J-6.4J                (c) 1.579 J           (d) none

Ans :   (c)

10.

Two charges q1 and q2 are placed 30 cm apart as shown. A third charge q3 is moved along the arc of a circle of radius 40 cm from C to D. The change in the potential energy of the system is \frac{{{{q}_{3}}}}{{4\pi {{\varepsilon }_{0}}}}k, where k is   

(a) 8q2                                                  

(b) 8q1 

(c) 6q2                                                  

(d) 6q1

Ans (a)

7.

Figure shows two equipotential (dashed) surfaces such that VA= -5V and VB= -15 V. What is the external work needed to move a -2 \displaystyle \mu C charge at constant speed from A to B along the indicated path ?

(a) 10 x 105 J

(b) 2 x 105 J

(c) 5 x 105 J

(d) 3 x 105 J

Ans (b)

Comprehension Based Question (8 to 9)

In the shown fig. points A and B are 4 cm apart along the lines of a uniform field
= 600 \hat{i} V/m

8.

Find the change in potential BVA.

(i) -20 V

(ii) -24 V

(iii) -25 V

(iv) -30 V

Ans (ii)

9.

What is the change in potential energy
UB UAas a point charge q = -3 \displaystyle \mu C is moved from A to B ?

(i) 72 \displaystyle \mu J

(ii) 75 \displaystyle \mu J

(iii) 25 \displaystyle \mu J

(iv) 50 \displaystyle \mu J

Ans (i)

10.

Four point charges of 0.6 µC, 2.2 \displaystyle \mu C, -3.6 \displaystyle \mu C and +4.8 \displaystyle \mu C are placed at the corners of a square of side 10 cm. What is the external work needed to bring a charge of -5 \displaystyle \mu C from infinity to the centre of the square ?(Assume the speed of the -5 \displaystyle \mu C charge is kept constant). What is the significance of the sign of your answer ?

(a) -5.55 J

(b) -4.0 J

(c) -2.55 J

(d) -3.75 J

Ans (c)

Comprehension Based Question  (11 to 12)

A uniform electric field of 400 V/m is directed at 37° below the x-axis, as shown in figure. Find the changes in potential

11.

VBA.

 (i) -9.2 V

(ii) -9.6 V

(iii) 9.6 V

(iv) -9.0V

Ans (ii)

12.

VB VC.

(i)  1.2 V

(ii) -7.2 V

(iii) -4.5 V

(iv) -5.2 V

Ans (ii)

13.

Four similar point charges q are located at the vertices of a tetrahedron with an edge a. Find the energy of interaction of charges in this system.

(a) \frac{1}{2}\,\frac{{{{q}^{8}}}}{{\pi {{\varepsilon }_{o}}a}}

(b) \frac{9}{2}\,\frac{{{{q}^{5}}}}{{\pi {{\varepsilon }_{o}}a}}

(c) \frac{3}{2}\,\frac{{{{q}^{2}}}}{{\pi {{\varepsilon }_{o}}a}}

(d) \frac{5}{4}\,\frac{{{{q}^{2}}}}{{\pi {{\varepsilon }_{o}}a}}

Ans (c)

Comprehension Based Questions (14 to 15)

An infinite number of charges each equal to q are placed along the x-axis at x =1, x = 2, x = 4, x = 8,…… and so on.

14.

Find the potential and electric field at the point x = 0 due to this set of charges ?

(a) 2kq; \frac{{4kq}}{3}

(b) 2kq; \frac{{9kq}}{2}

(c) 2kq; \frac{{5kq}}{9}

(d) 2kq; \frac{{4kq}}{5}

Ans (a)

15.

What will be the potential and electric field if in the above set up the consecutive charges have opposite sign ?

(a) \frac{5}{3}kq; \frac{4}{5}kq

(b) \frac{2}{3}kq; \frac{4}{5}kq

(c) \frac{3}{2}kq; \frac{5}{4}kq

(d) \frac{9}{5}kq; \frac{4}{5}kq

Ans (b)

16.

A point electric dipole with a moment \vec{p}is placed in the external uniform electric field {{\vec{E}}_{o}}, with \vec{p}­­ . In this case one of the equipotential surfaces enclosing the dipole forms a sphere. Find the radius of this sphere.

(a) {{\left( {\frac{p}{{3\pi {{\varepsilon }_{o}}{{E}_{o}}}}} \right)}^{{2/3}}}

(b) {{\left( {\frac{p}{{2\pi {{\varepsilon }_{o}}{{E}_{o}}}}} \right)}^{{5/3}}}

(c) {{\left( {\frac{p}{{9\pi {{\varepsilon }_{o}}{{E}_{o}}}}} \right)}^{{6/5}}}

(d) {{\left( {\frac{p}{{4\pi {{\varepsilon }_{o}}{{E}_{o}}}}} \right)}^{{1/3}}}

17.

A cone made of insulating material has a total charge Q spread uniformly over its sloping surface. Calculate the energy required to bring up a small test charge q from infinity to the apex of the cone. The cone has a slope length L.

(a) \frac{{qQ}}{{5\pi {{\varepsilon }_{o}}L}}

(b) \frac{{qQ}}{{8\pi {{\varepsilon }_{o}}L}}

(c) \frac{{qQ}}{{3\pi {{\varepsilon }_{o}}L}}

(d) \frac{{qQ}}{{2\pi {{\varepsilon }_{o}}L}}

Ans (c)

Practice Questions (JEE Advance Level)

Q.1

A uniform electric field of 400 V/m is directed at 37° below the x-axis, as shown in figure. Then the potential difference VB Aand   VB VC are respectively

(a)  -9.6 V & -7.2 V       

(b)  9.6 V & -7.2 V

(c)  9.6 V & 7.2 V       

(d)  -3.6 V & -4.2 V

 Ans : (a)

Q.2

Four point charges of 0.6 mC, 2.2 mC, -3.6 mC and +4.8 mC are placed at the corners of a square of side 10 cm. What is the external work required to bring a charge of -5 mC from infinity to the centre of the square without changing its kinetic energy. Explain the positive or negative sign of your answer ?

(a) –2.00 J        (b) –2.55 J     (c) –2.80 J          (d) –2.65 J

Ans (b)

Q.3

An infinite number of charges each equal to q are placed along the x-axis at x =1, x = 2, x = 4, x = 8,…… and so on. Then the potential and electric field at the point x = 0 due to this set of charges must be

(a)   5kq; \frac{{4kq}}{3}  

(b)   3kq; \frac{{8kq}}{3}     

(c)   2kq; \frac{{4kq}}{3}      

(d)   6kq; \frac{{3kq}}{3}

Q.4

In the previous question what will be the potential and electric field if in the above set up the consecutive charges have opposite sign?

(A) \frac{4}{3}kq; \frac{2}{5}kq    

(b) \frac{2}{3}kq; \frac{9}{5}kq         

(c) \frac{5}{3}kq; \frac{4}{5}kq        

(d) \frac{2}{3}kq; \frac{4}{5}kq

Ans (d)

Q.5

The electric field strength depends only on the x, y and z coordinates according to the law \displaystyle E=\,\,\frac{{a\left( {xi+yi+zk} \right)}}{{{{{\left( {{{x}^{2}}+{{y}^{2}}+{{z}^{2}}} \right)}}^{{3/2}}}}}, Where, a = 280 \displaystyle N{{m}^{2}}{{C}^{{-1}}}is a constant. If the potential difference between (3, 2, 6) and (0, 3, 4) is \displaystyle {{x}^{2}}. What is the value of x.

(a) 8        (b) 4      (c) 1          (d) 2

Ans (b)

Q.6

A positive charge is kept in a non uniform electric field at points A and B as shown in the figure. If {{U}_{A}} and {{U}_{A}} be the potential field energy of charge at points A and B respectively then

(a)     {{U}_{A}}={{U}_{B}}               

(b)     {{U}_{A}}>{{U}_{B}}

(c)     {{U}_{A}}<{{U}_{B}}                

(d)     cannot be predicted

Ans.  (b)

Q.7         

An infinite thread of charge density l lies along z-axis. The potential difference between points A (4, 3, 4) and B (3, 4, 0) is

(a) \frac{\lambda }{{2\pi {{\in }_{0}}}}\ln \left( {\frac{{\sqrt{{41}}}}{5}} \right)   

(b)    \frac{\lambda }{{2\pi {{\in }_{0}}}}\ln \left( 5 \right)             

(c)     zero  

(d)    \frac{\lambda }{{2\pi {{\in }_{0}}}}

Ans.  (c)